Car Speakers 2400W (2*1200W) Coaxial Speaker 6*9 Inch

1 Pair 6*9 Inch HiFi Coaxial Subwoofer 1200W Car Audio Music Stereo Sensitivity 92dB Full Range Speaker Damp-proof Car Audio Horn, Fits most car, boat, motorcycle or RV audio systems.

About Products:

1200W MAX. Power: Punchy bass, high SPL, handles dynamic range without distortion.

Precisely integrates four independent drivers: Tweeter, mid-tweeter, midrange, and woofer on a single axis. Ensures smooth frequency transition from highs to lows and accurate soundstage positioning, with rich and detailed tonal layers.

Wide Dispersion: Balanced soundstage for optimal listening from any seat.

High power output, suitable for various music styles such as pop, classical, jazz, country, and rock, all of which can be well controlled.

Universal non-destructive support for installing various models.

High noise reduction, HiFi level experience, enjoy stereo surround sound on the stage board, combining technology and playability.

Fits universal 6x9-inch mounting holes, suitable for most car models. Standard 4-ohm impedance for easy matching with factory head units or amplifiers. Includes mounting hardware and wire terminals for a straightforward DIY upgrade.

Specification:

Speakers Types: Coaxial speakers (Full frequency range)
Applicable models: Universal Car, Truck, Bus, etc
Material: Metal + Rubber + Magnetic+Plastic
MAX. MUSIC POWER 1200 W
NOMINAL POWER 120 W
Frequency Range (Hz): 29Hz to 33kHz
Impedance: 4Ω
Audio Sensitivity: 92dB
Signal to noise ratio: Less than 1%
Voltage: 12V~36V
Special Features: Damp-proof and High Sensitivity
Model Number: Car Audio Music Stereo

Package(Models to purchase):
2X Speakers
2X Speaker Cables
2X Speaker Covers
1X Screw Set

Installation Instructions

To protect the vehicle, cover it with a dust cloth.

Pry the door, unscrew the screws inside and around the door panel, and force outward from the bottom of the door panel to remove the door.

Remove the original car horn first fix the gasket on the original car horn.

1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed

THE DETAILS SHOW THE QUALITY

TREBLE TOP
Let your voice flow smoothly
Soft and sweet
Raised tweeter
The sound is briaht and metallic

HIGH QUALITY RUBBER EDGE
High quality rubber edge
High temperature resistance
Can be used for a long time without deformation

ELASTIC WAVE
Power of bounce
Reduce the loss of distortion degree
Restore the real voice

NO SOLDERING WIRE TERMINALS
Solderless wire
Pure copper material terminals
Guaranteed signal transmission
Easy to operate

CAST IRON BASIN STAND
Cold steel forging technology
The horn pelvic frame is strong
Reduce resonance effect in use
The frosted process is durable

HIGH ENERGY MAGNET
The remanence is low
The recovery magnetic permeability is small
Coercive force is greater

HORN SCREEN COVER
With horn mesh cover
Better protection of the horn

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.

2.Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.

3.The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.

4.There will be murmurs and buzzing when the reconfiguration process is not connected correctly.

5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.

6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.

7. Please allow 1-2cm measuring deviation due to manual measurement.