Autostart car start stop button Engine system push button keyless entry system 12v car alarm sysem
START STOP Engine system push button keyless entry system with start-stop button
Notice:
1. This model is working for 12v low and medium class cars only, can not work for high class cars of US and European.
2. If your car has chip immobilizer, you need to buy bypass or use other way to avoid chip immobilizer.
3 For opening trunk function,please add relay for your car.
Before installing one start engine, please install additional open relay (above 40A ) on Host ON2 if your car has HID lamp.
Product Description
1.push button engine start
2.no need use the original car key to start the engine
3.compatibility with current smart keys and starting alarm system
4.can be used in all kind of car
5.easy to install and to detach
6.can be matched your car alarm systems or pke system
7.auto control and starting system without car key
8.start and maintenance starting
9.check auto condition with display function
10.guarantee safety without another operation while driving
11.compatibility with current smart keys and starting alarm system
12.protect the risk with anti-theft system
Q & A :
1.How to find the ACC wire?
Please rearrange the 6P cable, after you twist the key to the first gear position (you can listen to music at this time), measure the line that has electricity on your original car is the ACC line.
2. For your 6p cable, but my original car is only 5p. what can i do ?
If your original car is a 5P line, the right connection is normally 1 power line, 1 ACC line, 2 ON lines, and 1 start line. If you didn't follow this step, it means you got wrong installation. pls recheck it again. and pls remember 2 ON lines need to distinguish which is ON1 line and which is ON2 line. If the two ON lines are always charged at the time of startup, you need to connect the two ON lines in parallel.
3. How to tell the wire ON1 and ON2?
If you test these two ON lines at startup, one of the two that always has power is the ON1 line. And If the other one has instant power is the ON2 wire.
Autostart car start stop button Engine system push button keyless entry system 12v car alarm sysem
Item heading
Item heading
Item heading
Item heading
Autostart car start stop button Engine system push button keyless entry system 12v car alarm sysem
START STOP Engine system push button keyless entry system with start-stop button
Notice:
1. This model is working for 12v low and medium class cars only, can not work for high class cars of US and European.
2. If your car has chip immobilizer, you need to buy bypass or use other way to avoid chip immobilizer.
3 For opening trunk function,please add relay for your car.
Before installing one start engine, please install additional open relay (above 40A ) on Host ON2 if your car has HID lamp.
Product Description
1.push button engine start
2.no need use the original car key to start the engine
3.compatibility with current smart keys and starting alarm system
4.can be used in all kind of car
5.easy to install and to detach
6.can be matched your car alarm systems or pke system
7.auto control and starting system without car key
8.start and maintenance starting
9.check auto condition with display function
10.guarantee safety without another operation while driving
11.compatibility with current smart keys and starting alarm system
12.protect the risk with anti-theft system
Q & A :
1.How to find the ACC wire?
Please rearrange the 6P cable, after you twist the key to the first gear position (you can listen to music at this time), measure the line that has electricity on your original car is the ACC line.
2. For your 6p cable, but my original car is only 5p. what can i do ?
If your original car is a 5P line, the right connection is normally 1 power line, 1 ACC line, 2 ON lines, and 1 start line. If you didn't follow this step, it means you got wrong installation. pls recheck it again. and pls remember 2 ON lines need to distinguish which is ON1 line and which is ON2 line. If the two ON lines are always charged at the time of startup, you need to connect the two ON lines in parallel.
3. How to tell the wire ON1 and ON2?
If you test these two ON lines at startup, one of the two that always has power is the ON1 line. And If the other one has instant power is the ON2 wire.